Shure DJ/Turntablist | M44G Scratch & Mix

Revived exactly the same as the original, this companion to the M44-7 provides an ideal balance between skip resistance and accuracy of sound reproduction for entertainment purposes.

The M44G is a versatile performance needle, appropriate for both intensive scratching and mixing.

With a tracking force of 0.75 to 1.5 grams, and a frequency response which is essentially flat from 20 to 20,000 Hz, the M44G produces a vibrant, high-definition sound. With the same unique Shure Type S cantilever as used on the M44-7, the M44G is a highly reliable performer, which is also easy on your vinyl.

M44G Features & Specifications

• Tone Arm Mount
  • Standard 1/2 inch
• Cartridge Type
  • Moving Magnet
• Output Voltage
  • Typical at 1 kHz
  • 6.2 mV RMS at 5 cm/sec peak velocity
• Recommended Load
  • 47 kilohms in parallel with 450 p
• Tracking Force
  • Effective at stylus tip
  • Range: 0.75 to 1.5 grams
• Stylus Cantilever
  • Shure Type S
  • Heat-treated aluminum alloy / tubular
  • 1.6 mil wall thickness / 34.5 mil diameter
• Diamond Stylus Tip
  • Polished natural gemstone: Spherical
  • Radius: 0.7 mil
• Frequency Response
  • Essentially flat from 20 to 20,000 Hz
• Stereo Channel Balance
  • Within 2 dB
• Channel Separation
  • Typical at 1 kHz: 20 dB
• Net Weight
  • 6.7 grams
• Height
  • 15.9 mm
• Warranty
  • Full one-year
• Accessories Included
  • Attached flip-down Stylus Guard
  • Headshell Screwdriver (Phillips)
  • Extra Set of 4 Headshell Wires (4-99)
  • Stylus Cleaning Brush
  • Headshell Weight (3 grams)
  • User Guide
  • Mounting hardware
  • Stylus guard
• Replacement Needles
  • Single with box & User Guide N44G
  • 4 Pack mounted on a card N44GQ